H30-9少溶剂环氧胶
H30-9少溶剂环氧胶研制于二十世纪八十年代，为国内首创，在国内推广以后结束了1032漆一统天下的局面，减少了浸渍次数，缩短了烘烤时间，大大节省了电机绝缘处理的生产周期并节约了大量电能。该胶由环氧树脂、酸酐固化剂组成，具有击穿强度高、吸水性小、防潮性好、绝缘电阻高、本身防霉、固体含量高（大于70%）等特点，适用于E、B级绝缘等级的电机电器线圈的浸渍绝缘处理。
技术指标
浸渍参考工艺：
产品预烘： 110~120℃ 1～２h
滴 漆： 室温 ≥30min
浸 漆： 40~50℃ 15～20min
烘 焙： 70~80℃ 1～２ｈ
130~140℃ 6～8ｈ
H30-19无溶剂环氧胶
H30-19无溶剂环氧胶为甲、乙二组份分装，可储存二年以上不变质，该胶无溶剂，属非易燃品，便于运输和储存，可直接用于粘接或加入600目硅微粉填料后用于环氧浇注，也可以加入30%的苯醇混合溶剂配成少溶剂胶用于电机电器绕组浸渍，在某军工电机上已应用多年。
技术指标
H32-20、H30-21无溶剂环氧胶
H32-20、H30-21无溶剂环氧胶与H30-19为同一系列胶，都是二十世纪八十年代甘肃涂料所与青岛油漆厂联合研制，并在青岛油漆厂批量生产，用于博山电机厂的军工电机上，H30-20环氧胶固化后胶层较H30-19柔软，韧性好，可用于直流微电机的线包浸渍处理。H30-21环氧胶粘度小一些，用于直流微电机电枢的环氧浇注.
TH特种环氧胶
该胶主要用于调压器上漆包线的粘接与绝缘，也可用于各种永磁电机磁瓦的粘接。该胶的突出特点：干燥快，在烘干时胶不流失，且粘接力强、电气绝缘性能高。
Zibo Yanchen Machinery Industry Co., Ltd. is a company integrating science, industry and trade. The company occupies an area of 80 acres and has a building area of 5,000 square meters. It has two substations: insulating materials and rubber products. The fixed assets are 8 million yuan. The output value is 15 million yuan. The company is located in Boshan Mountain Development Zone, 205 National Road, Bin (State) Bo (Hill) Expressway, and Bo (Hill) Lai (Rangao) Expressway pass through the area. Jiaoji Railway Zhang Bo Branch runs through here. The company subordinates the insulation material factory. Also known as Boshan Insulation Materials Factory, the trademark “Yan Chen” brand is a professional factory for the production of electrical insulating materials established under the direct assistance and support of the state-owned large-scale enterprise Boshan Motor Factory. It has domestic first-class insulation experts and engineering technicians. The factory has advanced production equipment workshops, built a research institute of insulating materials, constantly researching and developing new products, as well as measuring rooms, laboratories, and laboratories, with complete testing methods to ensure excellent product quality and good reputation.
The company developed and produced latex pump used for the rubber industry for the rubber industry. It is an upgraded product that borrows advanced technology from abroad and is innovative. After years of research and development by our company, it was successfully developed in 2007. To ensure the performance of the pump, the main parts are imported. Adapt to the chemical industry, metallurgy, electric power, papermaking, food, pharmaceutical, synthetic fiber and other industrial sectors to transport corrosive, viscous colloidal media. Compared with the twin-screw latex pump used by some rubber industries, this series of pumps has features such as high manufacturing accuracy, low investment in equipment, reliable performance, and easy maintenance. The maintenance costs and frequency in the operating cycle are much lower than those of twin-screw latex pumps! Make your company's production equipment run smoothly and efficiently.
手机版
微信公众平台