我公司所生产的PE管材所用材料为高密度聚乙烯材料，具有强度高、耐高温、抗腐蚀、自重轻、无毒等特点，被广泛应用于给水管等领域。
The PE pipes that our company produces are made of high density PE material, with features of high strength, high temperature resistance, anti-corrosion, light weight, non-toxic etc., which are widely used in water supply and other fields.
性能特点：…Performance Feature:
1、连接可靠：聚乙烯管道系统之间采用电热熔方式连接，接头的强度高于管道本体强度。…Reliable Connection: PE pipes are connected by melt fused connection method; the intensity of the joint is higher than that of pipe body.
2、低温抗冲击性好，可在-60-60℃温度范围内安全使用。…good impact resistance to low temperature, safe under the temperature of -60℃ to 60℃.
3、抗应力开裂性好，水流阻力小。…Good resistance to stress cracking, small flow resistance.
4、耐化学腐蚀性好，耐老化，寿命可达50年。…Good chemical corrosion resistance, ageing resistance, service life can be up to 50 years.
5、耐磨性好，耐磨性为钢管的4倍。…Good abrasion resistance, 4 times greater than that of steel pipe.
6、搬运方便，施工方式多。…Transport conveniently, multiple construction methods
应用范围：应用于建筑给水，建筑排水，埋地排水管，建筑采暖，输气管，电工与电讯保护管套、工业用管、农业用管等。
Application: Applied to construction water supply and drainage, buried pipe, construction heating, gas transmission pipe, electricity and telecommunication protection pipe, pipe used in industry and agriculture etc.
给水用高密度聚乙烯(HDPE)管(HDPE)…HDPE Pipe for water supply
给水用PE100聚乙烯(PE)管材产品规格…Specifications of PE100 for water supply
公称压力…PN
公称外径…DN
公称壁厚…Pipe Thickness
备注：1.管材定尺长度一般为6m、9m、12m，每根长度允许公差+0.4%，也可根据供需双方协商决定。2.给水用管材为蓝色或黑色，黑色管材有三条以上蓝色色条。3.执行GB13663-200《给水用埋地聚乙烯(PE)管材》标准，管材卫生性能符和GB/T17219-1998规定。
Note: 1. PE pipe is typically 6m, 9m and 12m, with +0.4% allowable tolerance, or as required by clients.2. Pipe for water supply is blue or blank, with more than 3 blue streaks in blank pipe. 3. Adopting GB13663-200 “Buried PE Pipe for Water Supply”, be qualified for sanitation standard GB/T17219-1998.
燃气用高密度聚乙烯(HDPE)管(HDPE)…HDPE Pipe for Gas Transmission
燃气用PE80埋地聚乙烯(PE)管材产品规格…Specifications of PE80 for gas transmission
公称外径…DN
压力等级…Pressure Rank
基本尺寸…Basic Size
允许偏差…Allowable Deviation
公称壁厚…Pipe Width
公差…Tolerance
米重…kg/m
备注：1.SDR为管材的标准尺寸比。(SDR=De/e)2.管材定尺长度一般为6m、9m、12m，每根长度允许公差+0.4%，外径在63mm以下的管材可盘卷，长度为50m、100m、150m三种，也可根据供需双方协商决定。3.燃气用埋地管材为黄色或黑色，黑色管材有三条以上黄色色条。4.执行GB15558.1-2003《燃气用埋地聚乙烯管材》标准。
Note: 1. SDR is the standard size proportion of the pipe.2. PE pipe is typically 6m, 9m and 12m, with +0.4% allowable tolerance; Pipes with outer diameter below 63mm can be coiled, the length of which are 50m, 100m and 150m, or as required by clients.3. Buried Pipe for Gas Transmission is yellow or blank, with more than 3 streaks in blank pipe.4. adopting GB15558.1-2003 “Buried PE Pipe for Gas Transmission”.
手机版
微信公众平台