0
Yantai Simon Bearing co. LTD
The inner and outer rings of taper roller bearings have tapered raceways, and there are tapered rollers between the raceways.If the tapered surface is extended, it will eventually converge to the bearing axis.Conical roller bearings are mainly used for bearing combined radial and axial loads, mainly radial loads. The axial bearing capacity of the bearing is determined by the contact Angle. The larger the antenna, the greater the axial bearing capacity.The taper roller bearing is a separate type bearing, and the inner ring with the roller and the retainer frame forms the inner assembly, which can be installed separately from the outer ring.This type of bearing can limit the axial displacement of one side of the shaft or housing and does not allow the shaft to tilt relative to the shell hole. Under the action of radial load, additional axial force will be generated. Therefore, in general, the outer ring and inner ring of the bearing should be installed relative to each end face in two bearings.Main use: these bearings are of automobile front wheel, rear wheel, transmission, differential, small gear shaft, machine tool spindle, building machinery, large agricultural machinery, railway vehicle gear speed reducer, rolling mill roll neck small reduction gear.
手机版
微信公众平台